1. Start
  2. /
  3. Knowledge hub
  4. /
  5. Battery Basics 3 | Warranty terms for battery storage systems – charge cycles, energy and service life

Introduction

Lithium iron phosphate (LFP) batteries have quickly become the obvious choice for many solar installers looking to offer their customers reliable, efficient and long-lasting energy storage solutions. But what do the warranties for these batteries actually mean – and how can you, as an installer, use the warranty terms to create added value for your customers? In this post, we take an in-depth look at LFP battery warranties, explain the terminology and give you practical tools for choosing the right product and communicating reassurance to the end customer. 

This blog post is not written to promote (or disparage) different manufacturers. Its purpose is to inform, especially private individuals, about how to interpret the various terms presented to them for different battery systems. 

General information about the ageing of LFP batteries

All lithium-ion batteries age, but LFP technology stands out for its stability and long service life. Ageing is affected by several factors: 

  • Number of charge cycles: Every time the battery is charged and discharged, it wears out a little. Over time, this gradually reduces the battery’s capacity, although the process is slow for LFP battery cells compared with other lithium-ion chemistries.
  • Temperature: High temperatures accelerate ageing, while cool conditions are beneficial. The installation environment therefore plays a major role – batteries placed in a well-ventilated, cool space often have a longer service life. Batteries kept in cold or cool conditions should have built-in heating to avoid damaging the battery.
  • Depth of discharge (DoD): The deeper the battery is discharged, the faster it ages. However, LFP batteries are durable and can often handle a high DoD without their service life being affected as significantly as that of other battery types.
  • Charging rate: When a battery is subjected to high power, i.e. a high current, heat generation in the battery storage system increases. Operating a battery at a high C-rate means that it is cycled in a very short time. Normally, a stationary battery operates at around 0.5 to 1.0C, i.e. it is charged or discharged in 2 or 1 hour. Stressing the battery cells with C-rates of up to 2–3 can significantly reduce their service life. 

In addition to these factors, the battery’s internal electronics and battery management system (BMS) can also affect ageing. A well-designed BMS protects the cells against overcharging, deep discharge and extreme temperatures, contributing to a longer service life and greater safety. 

Another aspect is that LFP batteries have very low self-discharge, which means they retain their charge for longer periods even when they are not in use. This makes them particularly suitable for applications where the battery is not cycled daily, such as backup power or holiday homes. 

In summary, LFP batteries are among the most robust and long-lasting lithium-ion batteries on the market, but as an installer, it is important to understand and explain how usage patterns and the environment affect the battery’s actual service life. 

How the battery is used affects its service life

How a battery is used affects its service life, and this is relatively complex because there are many different parameters to consider. As mentioned in the section above, there are some general points about LFP battery ageing that are important to bear in mind and will have a significant impact on how the battery ages.  

Below, we’ll use the Dyness BF100 as an example and look at how the battery’s performance varies depending on the number of charge cycles per day. The system is also affected by the aspects mentioned above: 

  • Number of charge cycles per day 
  • Temperature
  • Depth of Discharge – DoD 
  • C-rate and power output 
     
    The table below shows the annual degradation of the BF100 when running 1 or 2 cycles per day. The batteries have a SoH of 100% in year 0.  

If we reverse the reasoning and calculate how much energy passes through the battery each year, based on the battery’s SoH, we get the graph below. Degradation is higher with 2 cycles than with 1 cycle. However, you still get more kWh in total by running 2 cycles. This is a good example of how more charge cycles increase annual degradation, while delivering more kWh overall during the 10-year comparison period.

Three aspects of warranties

When investing in a battery storage system, it is important to understand which warranties apply and what they actually mean for the battery’s performance and service life. Warranty terms vary between manufacturers and models, but there are a few key concepts that recur in most agreements. These warranties are intended to protect the customer against unexpected faults and deteriorating performance, but they also contain important limitations that are useful to be aware of. Below are the three most common types of warranty terms: product warranty, number of charge cycles and energy throughput. Together, these provide a clearer picture of what is covered by the warranty and the conditions under which it applies.

Product warranty

This warranty covers manufacturing defects and material defects, often for 5–15 years. If the battery stops working due to a manufacturing defect within this period, the customer is entitled to a repair or replacement. 

For batteries in the residential segment, the product warranty is often 10–15 years, while in the commercial segment it is often 5 years, with the option to extend. It is also important to point out that not all components in commercial systems have the same warranty period. The table below shows an example of the warranties for a commercial battery system, excerpted from the manufacturer’s general product warranty terms. 

Component Standard warranty
Battery 5 years
BMS (Battery Management System) 5 years
EMS (Energy Management System) 3 years
PCS (Power Conversion System) 3 years
Fire suppression system 1 year
Liquid cooling unit 1 year
Table of product warranties for the various components of a commercial battery storage system

Number of cycles

A battery cycle, or charge cycle, measures how many times a battery can be charged and then discharged. A cycle is defined as fully charging and discharging the battery, but this does not have to happen in one go. For example, if you use 50% of the battery’s capacity one day and recharge it, then use another 50% the next day before recharging it again, you will have used one full cycle in total (2 x 50% = 100%). The number of cycles is an important measure of the battery’s service life, since its capacity gradually decreases as it goes through more cycles.0

Manufacturers often state how many cycles a battery can handle before its capacity falls below a certain level, helping users assess how long the battery is expected to last under normal use.0This specifies how many complete charge and discharge cycles the battery is guaranteed to handle, e.g.06,000 cycles at 80% DoD. If the battery reaches this limit before the warranty period expires, the warranty may end.0

Energy throughput

Some manufacturers also state a total amount of energy that may pass through the battery, e.g. 20 MWh per installed kWh. This is a more realistic measure, since it takes into account both cycles and depth of discharge, as well as the battery’s degradation over time.

Overall assessment

Some manufacturers also state a total amount of energy that may pass through the battery, e.g. 20 MWh per installed kWh. This is a more realistic measure, since it takes into account both cycles and depth of discharge, as well as the battery’s degradation over time.00

A comparison with a car

Imagine buying a new car with a (fictitious) exceptionally long 20-year warranty — that sounds fantastic! The car’s warranty is valid for 20 years, but it also has a limit of 100,000 miles. If you drive a lot and reach 100,000 miles after just 3 years, the warranty ends there, even though the time limit hasn’t expired. Battery warranties work in the same way: they are limited by both time and usage. For batteries, the equivalent of “mileage” is either the number of charge cycles or the total energy charged into and discharged from the battery.  

That’s why it’s extremely important not to focus solely on the number of cycles when buying a battery. If the energy throughput is too low, the system won’t be able to reach that figure anyway. Energy throughput will be the limiting factor, just as the mileage limit is in the example above. 

How do you compare like with like?

Let’s start by pointing out that comparing the different warranties offered for batteries is difficult. Manufacturers specify different points in time at which their warranties expire. Note, too, that a warranty expiring does not mean that the battery has reached either the end of its economic or technical service life. Where this threshold is set for the warranty varies between manufacturers. This means that the way a battery’s warranty is defined varies. This makes batteries complex and difficult to compare. A battery with a final capacity (SOH) of, for example, 80% has degraded by 20% from its factory-new state (100%). In other words, a 10 kWh battery then has 80% remaining, i.e. 8 kWh.  

As battery degradation is non-linear (i.e. there is more degradation at the beginning than at the end), a full cycle at the beginning of the battery’s service life will be a “genuine full cycle”. Whereas, after a few years, the cycles will contain less energy. This is shown in the image below, where the battery’s degradation is the dashed curve and the red curves represent a number of cycles over the battery’s service life. The scale is exaggerated for illustrative purposes. 

Summary of warranty terms from several manufacturers

Here is an overview of some common warranty terms for LFP batteries from leading manufacturers (examples): 
Note: The warranty applies until the first of these limits is reached. End-of-warranty capacity indicates the minimum capacity the battery must retain at the end of the warranty period. 

Missing data (or incomplete data)

As not all manufacturers provide data in the same way, and therefore do not state their warranties in the same way either, Teknikbloggen has chosen to highlight the manufacturers that were unable to provide complete data for the table above. This resulted in the following list of manufacturers: 

For batteries in the residential segment, the product warranty is often 10–15 years, whereas in the commercial segment it is often 5 years, with an option to extend. It is also important to note that not all components in commercial systems have the same warranty period. The table below lists an example of the warranties for a commercial battery storage system, excerpted from the manufacturer's general product warranty terms. 

Product Number of cycles SOH (%) Comment
Pixii Home 10 000 70  
Emaldo Power Store 6 000 70  
Raymond 8 000 - Warranty document could not be downloaded.
Manufacturers/resellers that have not specified energy throughput in their warranty documents

How can you extend the service life of your battery?

Correctly sizing and using your battery is essential to maximise its service life and get the most out of your investment.  

1. Correct sizing:

First, the battery should be sized to meet your actual energy needs, with some allowance for future increases. A battery that is too small may be discharged too often and too deeply, causing wear to the battery cells, while an oversized battery can entail unnecessary costs.

2. Avoid deep discharges: 

To extend its service life, it is important to avoid deep discharges and not to charge the battery to 100% unless necessary – many modern systems have settings to limit charge levels.  

Product Number of charge cycles
(datasheet)
Warranty
(years)
Cycle equivalents
(kWh per kWh)
SoH kWh /
module
Dyness Tower 6000 10
2946
70% 3,55
Dyness Tower PRO 8000 10
2581
70% 3,84
Dyness Stack100 8000 10
2947
70% 5,12
qapasity Arctic Series 8000 10
3500
70% 5,42
qapasity MAX 8000 10
3500
70% 5,22
SAJ HS3 (BU3) Not specified 15
3060
60% 5,12
Huawei S0 5000 10
2634
80% 5,00
Huawei S1 12000 15
4120
60% 7,00
Sigenergy SigenStor BAT10.0 (9kWh) 10000 10
2641
70% 9,00
GoodWe LX D5.0–10 Not specified 10
2956
70% 5,00
BYD HVS 2,56kWh Not specified 10
3010
60% 2,56
FoxESS ECS4300H 6000 10
3590
70% 4,15
Enershare Energy-CORE 9.6 6000 10
3094
60% 9,60
Sungrow SBR 3.2kWh (V13) Not specified 10
4200
60% 3,20
Sunwoda SunESS–H Not specified 10
2880
60% 5,00

The number of charge cycles a battery can provide is directly affected by the size of the charging and discharging window (State of Charge, SoC) you use. If you often charge the battery to 100% and discharge it to 0% (in other words, use its full capacity), the battery wears out faster and the number of possible charge cycles decreases. If, instead, you limit charging to, for example, 80% and avoid going below 20%, the number of possible charge cycles increases significantly.

This is because deep discharges affect the battery chemistry more than staying within a narrower SoC window. For lithium-ion batteries that are charged to 100%, this means adjusting how deeply the battery is discharged (Depth of Discharge – DoD). By not discharging the battery all the way, you can achieve more charge cycles.

3. The right temperature:

Keep the battery within the recommended temperature ranges and make sure the battery management system (BMS) is configured correctly and working as it should.  

4. Servicing and maintenance:

Regular inspections and maintenance, as well as avoiding high power peaks, also contribute to a longer service life. By following these guidelines, you can use your battery sustainably and cost-effectively over time.

Summary and conclusion

Understanding and being able to explain the warranty terms for LFP batteries is essential for you as an installer – both when choosing the right products and when building trust with the customer. By familiarising yourself with the product warranty, charge cycle count and energy throughput, you can help the customer make an informed choice and avoid misunderstandings further down the line. Think of the car analogy: it is not just about time, but also about how much the battery is used.  

So remember: A battery’s product warranty is about much more than just charge cycles. You need to look at the whole picture, and it is almost always energy throughput that sets the limit! 

With the right knowledge, you can deliver reliable, sustainable and future-proof energy storage solutions! Do not hesitate to contact us at Senergia if you have any questions about our products or their warranties. Especially when it comes to batteries! 

Need help finding the right solution?

We know it’s not always easy to know which product or solution is best for you. Whether you have questions about our range, need guidance or would like help finding a solution that suits your specific needs, we’re here for you. With our knowledge and experience, we’ll help you make the right choice.

Related posts

Technology blog

Battery School 1 | Understanding the difference between different battery cells

The solar industry is undergoing rapid development, with energy storage becoming increasingly important for maximising the benefits of installed solar power systems. For installers, this brings new opportunities and technical challenges. In this blog po...
Technology blog

Battery School 2 | The battery systems of the future – efficient, safe and scalable

Battery storage has become a central part of modern solar installations and is now one of the most dynamic areas of technology in renewable energy. For installers, this means not only new business opportunities, but also the need to keep up to date with...
Technology blog

Battery Basics 3 | Warranty terms for battery storage systems – charge cycles, energy and service life

Lithium iron phosphate (LFP) batteries have quickly become the obvious choice for many solar installers looking to offer their customers reliable, efficient and long-lasting energy storage solutions. But what do the warranties for these batteries actual...

This website uses cookies

Cookies ("cookies") consist of small text files. The text files contain data which is stored on your device. To be able to place some type of cookies we need your consent. We at Senergia AB, corporate identity number 556969-6023 use these types of cookies. To read more about which cookies we use and storage duration, click here to get to our cookiepolicy.

Manage your cookie-settings

Necessary cookies

Check to consent to the use of Necessary cookies
Necessary cookies are cookies that need to be placed for fundamental functions on the website to work. Fundamental functions are for instance cookies that are needed for you to use menus and navigate the website.

Statistical cookies

Check to consent to the use of Statistical cookies
To know how you interact with the website we place cookies to collect statistics. These cookies anonymize personal data.

Ad measurement cookies

Check to consent to the use of Ad measurement cookies
To be able to provide a better service and experience we place cookies to tailor marketing for you. Another purpose for this placement is to market products or services to you, give tailored offers or market and give recommendations on new concepts based on what you have bought from us previously.

Ad measurement user cookies

Check to consent to the use of Ad measurement user cookies
In order to show relevant ads we place cookies to tailor ads for you

Personalized ads cookies

Check to consent to the use of Personalized ads cookies
To show relevant and personal ads we place cookies to provide unique offers that are tailored to your user data