1. Start
  2. /
  3. Knowledge hub
  4. /
  5. The grid challenge – How the solar energy systems of the future can contribute to a stronger electricity grid

Introduction

Sweden’s energy transition is well under way, and solar energy has become an integral part of the electricity system of the future. But the rapid growth in solar PV systems is placing new and unexpected demands on the electricity grid, particularly the local distribution grid. If you work as a solar installer, it is vital to understand these challenges and how we can work together to contribute to a sustainable

Why can't the electricity grid accept unlimited amounts of solar electricity?

Historically, the Swedish electricity system has been built around electricity being generated at a few large sites and transported over long distances to consumers. Solar panels on house roofs change this logic – electricity is now generated where it is used. When many solar PV systems export electricity to the grid at the same time, particularly on sunny summer days, this can lead to local voltage rises and overloading of the grid. The distribution grid, and distribution substations in particular, are designed to handle peaks in electricity demand – not generation – which means the system can quickly reach its capacity limit when many households want to export solar electricity at the same time.

Challenges posed by solar PV systems for electricity network companies

Solar PV systems affect the electricity grid in several ways, but the biggest challenges for electricity network companies in the distribution network are:

  • Voltage control: When many solar PV systems generate electricity at the same time, voltage in the grid can rise above permitted levels. This is particularly noticeable near distribution network transformers, where several households are connected to the same point.
  • Transformer capacity: Distribution substations are bottlenecks. If both electricity demand (e.g. electric vehicle charging) and generation (solar electricity) are high at the same time, the transformers can become overloaded. The system is designed to cope with peak loads for a few hours a year, but with many new solar PV systems, these peaks can become more frequent and unpredictable.

Furthermore, solar electricity generation is weather-dependent and often poorly synchronised with household electricity use, meaning that surplus electricity often has to be exported to the grid—just when the grid is under the greatest strain.

Energy storage – the key to increased capacity

Energy storage, particularly batteries, offers a solution to several of these challenges. By storing surplus electricity during the middle of the day and using it in the evening and at night, self-consumption can increase from 30–40% to as much as 75–80% (when installing around 25–40 kWh). This means that considerably less electricity needs to be exported to the grid, reducing the load on the entire electricity grid when the sun is shining across the country. This will reduce the negative aspects of solar power. It would fundamentally change how solar PV systems are viewed, as they would be intended solely for self-consumption. The table below illustrates what proportion of the solar energy produced stays within the property (the column on the far right). It is important to emphasise that this is only about making use of your own solar electricity, not disconnecting from the electricity grid. During the winter half of the year, all Swedish households will depend on the electricity system. But with a larger energy storage system, you can both shave peak loads and reduce the amount of electricity purchased during the most expensive hours.

Battery-
capacity
Electricity use Export kWh Self-
consumption kWh
Self-
sufficiency %
Own-
consumption %
5kWh 15MWh 4880 4317 28,7 46,8
10kWh 15MWh 3862 5242 34,9 57,4
15kWh 15MWh 3013 6092 40,1 66,6
20kWh 15MWh 2262 6889 45,9 75,2
25kWh 15MWh 1850 7049 46,9 79,2
30kWh 15MWh 1638 7238 48,2 81,5
40kWh 15MWh 1482 7557 50,3 83,6
A typical detached house with 10kWp of solar panels and annual electricity consumption of 15,000kWh (2 adults and 2 children), with energy storage systems of different sizes (5 to 40kWh).

Batteries also make it possible to control when electricity is exported — or to avoid exporting it altogether. With smart control, the solar PV system and battery can work together to adapt to both the household’s needs and the grid’s capacity. This is done using dynamic export limitation, which is a standard feature of all inverters. The local grid operator could adjust this limit depending on the time of year. For example, export could be limited in summer, with no restrictions from September to March. This means that more households can connect solar panels without the grid needing to be expanded at the same pace.

EMS systems – coordination for flexibility and stability

  • A modern EMS (Energy Management System) is the brain of the solar energy systems of the future. An EMS can coordinate solar panels, energy storage, EV chargers and other loads to optimise the use of both self-generated electricity and electricity purchased from the grid. But an EMS can do more than that:
  • Frequency regulation: By being able to charge or discharge batteries quickly, an EMS can help stabilise the electricity grid’s frequency, which is essential for the stability of the entire power system.
  • Demand flexibility: An EMS can automatically control when loads such as heat pumps or EV chargers start and stop, so that electricity is used when it is cheapest or when the grid is least under strain. This reduces peak loads and saves the customer money.
  • Local flexibility: In areas where many households have solar panels and batteries, EMS systems can work together to create local flexibility. By coordinating exports and imports at distribution substation level, more solar PV systems can be connected without the grid needing to be expanded. EMS also enables energy communities where several properties share resources and optimise grid use together.

With open standards and digitalisation, EMS systems can connect to both local and national flexibility markets, opening up new business models and revenue streams for both installers and end customers.

The future of solar energy systems – sizing and control for zero export

By combining a correctly sized solar PV system (kWp), an adequately sized energy storage system (kWh) and smart control, the need to export electricity to the grid can in principle be eliminated. For example, calculations show that if exports are limited to 5 kW for a home with 10 kWp of solar panels and a 9 kW inverter, only 2.2% of annual generation is lost. With a battery and smart control, this loss can be close to zero.

This means that solar PV systems can now be sized and controlled so that they have no adverse impact on the electricity grid – and in some cases even help strengthen it. Smart home systems and energy communities, where several households collaborate on generation and electricity use, offer even greater opportunities to optimise the use of the grid’s capacity.

The solar energy systems of the future – Heat pumps and V2X

Heat pumps and V2X technology (Vehicle-to-Everything, meaning bidirectional electric vehicle charging) represent two of the most exciting innovations for increasing the self-consumption of electricity in households while also creating benefits for the energy system as a whole. By combining a heat pump with a V2X-compatible charging system, households can not only optimise their own energy use, but also help balance the electricity grid. The heat pump uses electricity to heat the home efficiently and can be controlled to take advantage of periods of high solar generation or low electricity prices. At the same time, the electric car acts as a flexible energy store: with V2X, the car can be charged when there is a surplus of solar electricity and supply electricity back to the home or grid when needed. This means that the household can store solar energy in the car during the day and use it for heating or household electricity in the evening, reducing the need to buy electricity from the grid. At a system level, this flexibility helps smooth out peak loads and reduce the strain on the electricity grid, which is essential as the share of renewable energy increases. The combination of a heat pump and V2X therefore delivers both financial and environmental benefits—for the household and for the energy system as a whole.

The paradox of solar panel owners becoming unwelcome

An interesting paradox has emerged as more and more households install solar panels and batteries: despite the fact that these resources can offer significant benefits to the electricity system, they risk being excluded from the electricity grid if grid owners introduce extra tariffs and charges for exporting electricity. If it becomes more expensive or less profitable to sell surplus electricity to the grid, households will instead manage their electricity use to maximise the use of their own self-generated electricity behind the meter. This means that the 300,000 solar PV systems already in Sweden in 2025 will, in practice, be isolated from contributing to the shared electricity system. As a result, the electricity grid will miss out on valuable resources that benefit the system, such as battery control, local flexibility, ancillary services and frequency regulation. Rather than seeing solar panel owners as a burden, grid owners and system operators should create incentives and markets that make it attractive for households to contribute their resources to the energy system as a whole—to the benefit of both the grid and society at large.

Summary – Working together for the electricity grid of the future

Solar energy is one of the most cost-effective and climate-friendly energy sources we have. But to make the energy transition a success, solar companies, installers and electricity grid operators need to work together. By correctly sizing and controlling solar PV systems, using energy storage and introducing smart controls, we can create a robust and flexible electricity system together. With the right technology and a willingness to collaborate, we can integrate more solar energy than ever before – while keeping the electricity grid strong and ready for the future.

Together, we are building the sustainable energy system of the future!

Need help finding the right one?

We know it’s not always easy to know which product or solution is best for you. Whether you have questions about our range, need guidance or would like help finding a solution that suits your specific needs, we’re here for you. With our knowledge and experience, we’ll help you make the right choice.

Related posts

Salmon swim underwater in a metal structure.
Video

The Salmon Project

Part of Senergia Sustainable Initiatives, a programme that goes beyond traditional material supply. Through the initiative, we create long-term value and actively contribute to a more sustainable future, both within the energy industry and in society at...
Technology blog

Solar energy systems with open architecture – the flexible energy solution of the future

Solar energy has quickly become one of the most popular and effective solutions for producing sustainable energy. But as the technology develops, so too do the demands for flexibility, integration and future-proofing. A central concept in this developme...
Technology blog

Comparison of EMS solutions

The energy industry is on the cusp of a technological revolution, where smart solutions and digitalisation are changing how we produce, store and use energy. At the heart of this development are EMSs, or Energy Management Systems, which are rapidly evol...

This website uses cookies

Cookies ("cookies") consist of small text files. The text files contain data which is stored on your device. To be able to place some type of cookies we need your consent. We at Senergia AB, corporate identity number 556969-6023 use these types of cookies. To read more about which cookies we use and storage duration, click here to get to our cookiepolicy.

Manage your cookie-settings

Necessary cookies

Check to consent to the use of Necessary cookies
Necessary cookies are cookies that need to be placed for fundamental functions on the website to work. Fundamental functions are for instance cookies that are needed for you to use menus and navigate the website.

Statistical cookies

Check to consent to the use of Statistical cookies
To know how you interact with the website we place cookies to collect statistics. These cookies anonymize personal data.

Ad measurement cookies

Check to consent to the use of Ad measurement cookies
To be able to provide a better service and experience we place cookies to tailor marketing for you. Another purpose for this placement is to market products or services to you, give tailored offers or market and give recommendations on new concepts based on what you have bought from us previously.

Ad measurement user cookies

Check to consent to the use of Ad measurement user cookies
In order to show relevant ads we place cookies to tailor ads for you

Personalized ads cookies

Check to consent to the use of Personalized ads cookies
To show relevant and personal ads we place cookies to provide unique offers that are tailored to your user data