

Stationary energy-storage systems are facing a major shift in how they must be designed, documented and recycled. The new EU Batteries Regulation, Regulation (EU) 2023/1542, establishes a comprehensive regulatory framework for the sustainability, safety, labelling, producer responsibility and waste management of batteries on the EU market [1,2].
For Senergia’s installers, this means stricter requirements regarding:
At the same time, El‑Kretsen/Batterikretsen has announced increased fees, which means that the cost picture for stationary energy-storage systems will change from 2026. Senergia has described this in more detail in its news article about new fees related to El‑Kretsen [9].
The purpose of this post is to:
This Technical Blog post focuses solely on stationary batteries for energy storage – not vehicle batteries or small batteries.
Producer responsibility means that whoever places a product on the market is responsible for ensuring that it is collected and handled in an environmentally sound manner when it becomes waste. To fulfil this responsibility, producers often join a producer responsibility organisation (PRO), which coordinates collection, recycling, reporting and the allocation of costs. Collection and recycling are therefore organised in practice by the PRO, but legal responsibility remains with the producers (who finance the system).
Previously, batteries were governed primarily by the EU Batteries Directive 2006/66/EC, implemented in Swedish law through, among other things, producer responsibility regulations and the Waste Ordinance. This model was based on each Member State implementing the rules nationally, which led to variations between countries. The new Batteries Regulation is instead an EU regulation and therefore directly applicable law in all Member States, with harmonised requirements throughout the entire life cycle of batteries [1,2].
Lithium-ion batteries dominate stationary energy storage today. Their materials are both valuable and, in some cases, critical (lithium, nickel, cobalt, etc.), and improper handling can lead to fire and environmental risks. The Batteries Regulation therefore aims to increase recycling and material recovery, while also ensuring traceability and accountability throughout the entire chain, from production to waste [2,3].
In Sweden, producer responsibility for industrial batteries – which normally include stationary energy storage systems – is handled mainly through coordinated schemes via a PRO, or producer responsibility organisation (more information below). Elkretsen is one example of such an organisation. On its page about industrial and electric vehicle batteries, it explains that the cost typically arises when the industrial battery is eventually collected and recycled, rather than as a visible fee when the product is first sold [6]. Elkretsen has launched a wholly owned subsidiary, “Batterikretsen”, which will manage and administer the recycling of stationary energy storage systems (or industrial batteries, as Elkretsen itself calls them). Producers and importers can be affiliated with PROs other than Elkretsen. The requirement is that the PRO is approved by the Swedish Environmental Protection Agency.
The new Batteries Regulation and forthcoming Swedish rules frequently use the term PRO – Producer Responsibility Organisation. A PRO is an organisation that, on behalf of affiliated producers, fulfils producer responsibility collectively by:
In Sweden, the Swedish Environmental Protection Agency is the authority responsible for approving producer responsibility organisations (PROs), including those for batteries. As of 14 December 2025, no PRO has yet been formally approved under the new Batteries Regulation system, although El‑Kretsen already operates a well-established system for collecting and recycling industrial batteries in practice [6,7].
However, the announced fee increase—which Senergia has informed customers about—applies from 2026‑01‑01, in preparation for the stricter requirements arising from the Batteries Regulation and the forthcoming PRO structure [9].
The Batteries Regulation covers the entire life cycle of batteries placed on the EU market: from raw material extraction and production, through use, to reuse (second life) and recycling [2,5].
It sets requirements for, among other things:
Stationary battery energy storage systems are specifically addressed in the Regulation. These include:
This affects product development and sizing, as well as how performance is monitored over time in the future.
The Regulation also strengthens producer responsibility: anyone who first places a battery on the EU internal market is subject to minimum requirements for the collection, treatment and reporting of waste batteries [1,2].
Larger companies (with a turnover of more than EUR 40 million) that place batteries on the market must also introduce due diligence systems to prevent and mitigate adverse impacts on human rights and the environment in their supply chains. These requirements apply to these companies from August 2025 [4].
Product selection
For Senergia’s installers, the Batteries Regulation means, among other things, that:
Documentation and customer information
Going forward, the installation documentation should clearly state:
Under normal circumstances, the wholesaler – which places the product on the Swedish market – bears producer responsibility towards its PRO [6].
For Senergia’s standard supply chains, this means that producer responsibility for the stationary systems you install is already handled by Senergia or Senergia’s suppliers and their affiliation with an approved PRO.
Important note for import supply chains:
If an installer imports batteries or complete energy-storage systems directly from a wholesaler or supplier outside Sweden (even if based within the EU), the installer may in practice be the first to place the battery on the Swedish market. In that case, the installer needs to:
This is an important distinction compared with purchasing Senergia products from a Swedish wholesaler that already handles producer responsibility [6,7,9].
El‑Kretsen/Batterikretsen has announced increased fees for electrical and electronic waste, including batteries, as part of the adaptation to the Batteries Regulation and increased handling costs. Senergia has described this in its news article about El‑Kretsen and new fees [9].
For Senergia’s range of stationary energy-storage products, this means that:
For you at the costing and quotation stage, this means that system prices from 2026 must include the new fee level, and that you should make clear that these are legally mandated costs associated with safe and sustainable recycling – not arbitrary surcharges [1,2,6,9].
The regulation introduces requirements in stages for:
For stationary energy storage, this may mean:
The regulation also highlights “second life” – for example, when vehicle batteries are converted into stationary systems – where specific requirements apply to safety, documentation and producer responsibility in their new use [2].
From 2027, batteries must include a digital product passport. A digital product passport for batteries is a structured digital information profile linked to each individual battery, often via a QR code or similar identifier. It contains details about the manufacturer, chemical composition, performance, carbon footprint, area of use and how the battery should be handled for reuse and recycling. The aim is to increase transparency throughout the value chain so that manufacturers, installers, retailers, users and recyclers have access to the same accurate data. This is necessary to meet forthcoming EU requirements, enable circular flows of materials and reduce the environmental impact of batteries. It also makes it easier to assess quality, safety and residual value in, for example, second-life energy storage applications.
These will include, among other things:
In the longer term, this means that installers will be able to:
As the digital product passport comes into effect on 18 February 2027, Senergia’s technology blog will revisit the topic ahead of the regulation being incorporated into Senergia’s product range. Digital product passports are part of the EU Ecodesign Directive 2009/125/EC
The Batteries Regulation means that stationary energy storage systems are becoming more regulated, more traceable and more integrated into a circular economy.
If you install Senergia products, you can trust that we, as distributor and importer, comply with the applicable regulations and legal requirements. In addition, as an installer, you should be aware of what applies when products have not been purchased from a responsible wholesaler. In summary, the following applies:
Senergia will continue to adapt its product range, prices, training and technical support to make it as easy as possible for you to meet legal requirements while offering competitive, safe and future-proof energy storage solutions.
We know that it is not always easy to know which product or solution is best. Whether you have questions about our range, need guidance or would like help finding a solution that suits your specific needs, we are here for you. With our knowledge and experience, we will help you make the right choice.


