1. Start
  2. /
  3. Knowledge hub
  4. /
  5. Nordmount’s roof-edge protection for safe solar panel installations

Hello everyone! A very warm welcome to a new episode of Senergia Play. Today we’ve climbed up onto a roof here in Knivsta, and with me I have Philip Aspler from Nordmount.

– Philip, I thought we could talk about some of your new products today.

– It’s great to be here in this lovely weather and spend the day with you, Tim. Since we entered the solar market, we’ve launched many new, innovative products.

– You’ve made a big impact since last summer, with the Metafästet, standing-seam clamps and everything else you’ve launched. It was almost a bit of a revolution in the Swedish solar energy market.

– I’d say it’s about even more products than that. All our products, and especially the company as a whole, are characterised by innovation. Everything we launch has to be innovative and well-developed, especially for the conditions in which the products will be used.

– You’ve really taken solar installers by storm and developed a much-appreciated system. Today we’re going to talk about a new product in roof safety. What made you move into this area?

– We’re very attentive to feedback and meet with lots of installers. We have a long wish list, but a roof safety solution for solar installations was very high on it, perhaps even at the very top.

– There’s been a lot written about the solar industry, roof safety in general and perhaps the construction industry as a whole. What requests did you receive?

– People wanted something very simple and convenient. As with our other products, there had to be a common thread: making installation faster and safer. At Nordmount, it’s important to us that our products are durable, robust, made in Sweden and thoroughly tested.

This was high on the wish list, and we listened and developed a solution. It’s been a major project involving many hours of work, and a great deal of time and energy. Now the product is on the market, which feels really good. The response has been fantastic.

– When you install solar panels, you put up scaffolding, and collective fall protection is essential. For a house installation, which might take one and a half to two days, or three days for a large one, I’d say roof-edge protection is a challenge. Can you tell us what you’ve launched in this area?

– We’ve developed unique roof-edge protection to make it easier for installers to create safe protection at the gable edge. With this solution, there’s no need to put up scaffolding around the gable itself. The protection we’re standing next to here consists of a top rail, intermediate rails and protection at the bottom with a toe board.

– The great thing about your bracket and the holder for the roof-edge protection – what do you call it?

– We call it Edge Protection.

– With it, you can secure the roof-edge protection at several points along the roof. Otherwise, there may be nothing to attach it to, in which case you need to build some sort of stair tower or similar to get the roof-edge protection in place. This means higher costs, takes longer and can be quite cumbersome, with all the components that need to be brought along to the installation.

– Exactly. The great thing about our new Edge Protection is that it works with our existing products.

– Can you tell us a bit about that? How have you considered different roof types and how Edge Protection should be secured?

– It’s screwed in place with our Nordmount screws, just like our other products. You use wood screws or sheet-metal screws, depending on whether it’s being fixed to the timber substrate or to our existing brackets. Here we’re installing it on a standing-seam metal roof, but the solution has been developed for use on different roof types.

– I’ve been with you in the lab and seen how much attention you pay to the details and how extensively you test. How do you develop and test a product like this? What does the process look like?

– We test it in accordance with an EN standard, and the product is approved as meeting the requirements.* We carry out tests both in-house in our own test laboratory and at an independent third party. Products are tested and approved before we launch them on the market.

– I think this will be very important for the solar industry as a whole. It shows that you’re taking full responsibility, both for well-designed installations and good products, and for solar installers’ working environment.

– I agree. That’s part of the thinking behind our move into roof safety. It’s no secret that we want to establish ourselves in that market too. This is our first product, and many more are coming, in the autumn and after the New Year.

– Okay, Philip, let’s take a closer look at the products. What do we have in front of us?

– Here we have our new product, the roof-edge protection bracket. It has two fastening surfaces, which are used depending on where the fixing points are. It can be adjusted to suit the position and the type of roof it’s being installed on.

– So it can be used on standing-seam metal roofs like this one, but also on felt and tiled roofs?

– Solutions for more roof types are coming as new products. The one for felt roofs is on its way.

Here we’re securing it with our standard Nordmount sheet-metal screws, 6.3 × 19 millimetres. We’ve also designed a hole pattern for fixing it to a timber substrate with our wood screws. As I mentioned earlier, it’s important to use the products included in our tested system.

– So you know exactly where the screws should go?

– Yes, the hole pattern shows where they should be placed.

– And then the bracket folds up, so it’s easy to carry in the car?

– Yes, it’s very easy and convenient to transport. Every installation team should perhaps have at least two with them. First, you screw the bracket in place using the hole pattern, and then fold it up for use as roof-edge protection.

– I thought we could give installers and others in the industry a few tips on how to use Edge Protection. What are your best tips, and what have you learnt during development?

– Our other products are quick and easy to install, and we’ve carried that through into the development of Edge Protection. It should be quick and safe to use.

But it’s very important to read the installation instructions to ensure the installation is done correctly. Use the right components, from the largest part down to the smallest screw. Read everything carefully before using the product.

It’s also important to screw the product in place and secure it before folding it up into position as roof-edge protection.

– Do you have any tips on planning roof safety, for example how to think about scaffolding, roof-edge protection, measurements and distances?

– Above all, read the installation instructions and check the measurements and limits of use. Among other things, they specify a measurement of five plus one metres.* Plan the safety measures based on the house and the conditions of the project. It’s very important to have a plan before installation begins.

– The importance of the working environment cannot be overstated, and it needs to be an ongoing part of KMA work covering quality, the environment and occupational health and safety. It’s about establishing an effective way of working. I see far too many teams that perhaps take it a little too lightly. Sitting down, planning and then working step by step will be incredibly important.

– I completely agree. We’ve gathered all the relevant information on our website, and it’s available in several languages. Go and read it before using our products.

– What advice would you give a homeowner who’s thinking about getting solar panels? What benefits does Nordmount offer homeowners?

– Above all, it’s a system made in Sweden, which in itself gives peace of mind. We manufacture all our products down in Småland. Choose an installation system with fixings suited to the type of roof, and which avoids unnecessary penetrations through the roof.

And above all: choose a company that doesn’t compromise on roof safety.

– Those are really good tips, Philip. Many thanks, and speak soon!

 
 
 
 
 
 
 

See Nordmount’s products in our online shop

Need help finding the right one?

We know it’s not always easy to know which product or solution is best. Whether you have questions about our range, need guidance or would like help finding a solution that suits your specific needs, we’re here for you. With our knowledge and experience, we’ll help you make the right choice.

Related posts

Senergia Play

We meet ATMOCE

In this episode of Senergia Play, Tim meets ATMOCE’s Nordic head Robin for a conversation about microinverters, battery storage and flexible solar energy systems. We look at how the technology works and the opportunities it offers for safety, panel-leve...
Senergia Play
Video

Solis and Dyness on a farm in Halland

Brukets Gård combines solar panels with battery storage to make better use of more of the electricity it generates itself, while creating a more reliable and flexible energy supply. The solution is sized to meet the farm’s actual energy and power requir...
Senergia Play
Video

Interview with Tibber’s co-founder Daniel Lindén

How can smart energy management make everyday life easier while also contributing to the energy transition? In this episode of Senergia Play, Tim meets Tibber co-founder Daniel for a conversation about how solar panels, batteries, EV charging and heat p...

This website uses cookies

Cookies ("cookies") consist of small text files. The text files contain data which is stored on your device. To be able to place some type of cookies we need your consent. We at Senergia AB, corporate identity number 556969-6023 use these types of cookies. To read more about which cookies we use and storage duration, click here to get to our cookiepolicy.

Manage your cookie-settings

Necessary cookies

Check to consent to the use of Necessary cookies
Necessary cookies are cookies that need to be placed for fundamental functions on the website to work. Fundamental functions are for instance cookies that are needed for you to use menus and navigate the website.

Statistical cookies

Check to consent to the use of Statistical cookies
To know how you interact with the website we place cookies to collect statistics. These cookies anonymize personal data.

Ad measurement cookies

Check to consent to the use of Ad measurement cookies
To be able to provide a better service and experience we place cookies to tailor marketing for you. Another purpose for this placement is to market products or services to you, give tailored offers or market and give recommendations on new concepts based on what you have bought from us previously.

Ad measurement user cookies

Check to consent to the use of Ad measurement user cookies
In order to show relevant ads we place cookies to tailor ads for you

Personalized ads cookies

Check to consent to the use of Personalized ads cookies
To show relevant and personal ads we place cookies to provide unique offers that are tailored to your user data